Do we really know about the data cables we use every day? How is the data cable produced? In fact, the production of data cables requires a lot of processes, and each process is very important, because the entire process from the beginning to the end of the system is interrelated. Therefore, Data cable manufacturers standardize the production process in the production process. The quality of the data cable is good and durable.

USB data cable production process and points of attention

Cutting cable: can not be crushed, scratched, size length

Peeling: Can not scratch the core wire, size and length

Twisting: Weaving and twisting

Cutting aluminum foil: can not cut the core wire / cut clean

Core wire: Can not break copper wire and scratch copper wire

Solder: Pay attention to the temperature of the soldering iron / can not be misplaced / even tin / fake solder / tin point bright

Tin inspection: can not be misplaced / even tin / fake welding / tin point to be full of light

Forming the inner mold: pay attention to the molding pressure temperature time, can not wash the rubber, the cloak, crush the iron shell

Semi-finished product test: take out the position according to the sample, can not open, short circuit, INT function is not good

Forming the outer mold: pay attention to the molding pressure temperature time, can not be glued, cloaked, crushed iron shell

Test: take the position according to the sample, can not open, short circuit, INT function is not good

Appearance inspection: can not be glued, lack of glue, cloak, crushed iron shell, scratched

Packing: The appearance is clean and the size is tied according to the drawings.